Projector with symmetrical light distribution.
Circular design in diameter: 134mm.
Complete IP68 protection.
Protection rating of resistance to harmful mechanical impacts: IK10.
Robust body and trim made of die-cast aluminium coated with polyester powder along with C4 treatment for corrosion resistance to guarantee further durability. Textured paint finish. Different RAL colour finishes available under request. C5-M special coating for highly corrosive environments is available under request.
Facetted metalized reflector.
15 mm tempered protection glass clear as standard, other finishes under request.
Temperature resistant silicone rubber gasket.
A4 stainless steel locking screw. Optional supply of A2 stainless steel vandal-resistant screws [reference F2.A0134+F2.A1].
Built-in driver, included.
Electronic options for lighting control: DALI.
Passive temperature management: heat dissipation flows through the fixture body itself.
Mounting to the ceiling, to the wall or to the floor by 316L stainless steel support with two securing holes that enables the device to be swivelled and adjusted to achieve specific lighting effects.
Cable entry from the top of the fixture.
Double cable gland entry for installation in series.
Pre-wiring of 0.5 metres cable 3x1mm2.
IP68 connector to be ordered separately [reference F3.A3 (On/Off) / F3.A5 (DALI) ].
Luminous flux of the light source: 870lm
Luminous flux of the luminaire: 470lm
Light source power: 4,8 W
Luminaire power: 5.32 W
mA: 150 mA
Colour temperature: 3000K
Chromaticity Tolerance: MacAdam 3
Beam angle: 22
Photobiological safety group: 1
This product contains a light source of energy efficiency class: D
Rated Median useful life: 50000h L90B10
IK: IK10Incandescent filament: 850°
Luminaire diameter: 134mm
Weight: 1.95 Kg
There are accessories available for dimming devices.
*Add the suffix after the reference to indicate your electronic equipment choice.